LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Clutch System) >> Master Cylinder >> Assembly

Master Cylinder: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the clutch damper.
  2. Apply a coat of grease to the contacting surfaces of the push rod and piston before installation.
    1. Grease:  SILICONE GREASE G40M (Part No. 004404003)
    Fig 1: Applying Coat Of Grease To Contacting Surfaces Of Push Rod & Piston
    G02876192Courtesy of SUBARU OF AMERICA, INC.
  3. To assemble the master cylinder, reverse the sequence of disassembly procedure.
    1. Tightening torque:  10 N.m (1.0 kgf-m, 7 ft-lb)
scientia non olet · About LEMON Manuals