LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza RS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

  1. Using a press, install a new ball bearing to reduction driven gear.
    Fig 1: Installing New Ball Bearing To Reduction Driven Gear Using Press
    G01998982Courtesy of SUBARU OF AMERICA, INC.
  2. Install snap ring to reduction driven gear.
    Fig 2: Installing Snap Ring To Reduction Driven Gear
    G01998983Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals