LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza RS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Dropping Resistor >> Removal

Dropping Resistor: Removal

NOTE: Dropping resistor is installed on non-turbo models only.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G01998896Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake duct (Non-turbo model). See REMOVAL , Air Cleaner Case.
  3. Disconnect the connector from dropping resistor.
  4. Remove the dropping resistor.
    Fig 2: Removing Dropping Resistor
    G01998897Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals