LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Systems >> Rear Abs Sensor >> Inspection >> Sensor Gap

Sensor Gap

Clearances (sensor gaps) should be measured one by one to ensure the tone wheel and speed sensor are installed correctly.

NOTE:
  • If clearance is narrow, adjust by using the spacer (Part No. 26755AA000).
  • If clearance is wide, check the outputted voltage then replace the ABS sensor or tone wheel if the outputted voltage is outside the specification.
  1. ABS sensor clearance:  0.7 - 1.2 mm (0.028 - 0.047 in)
Fig 1: Measuring ABS Sensor Clearance
G01980540Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals