LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Forester XS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Automatic Transmission) >> Reduction Driven Gear >> Installation

Reduction Driven Gear: Installation

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the range select lever to "P" range.
  2. Using a plastic hammer, install reduction driven gear assembly and new washer, and tighten new lock nut.
    1. Tightening torque: 100 N.m (10.2 kgf-m, 73.8 ft-lb) 
    Fig 1: Identifying Reduction Driven Gear Assembly And Tightening New Lock Nut
    G00936287Courtesy of SUBARU OF AMERICA, INC.
  3. After tightening, stake the lock nut securely.
  4. Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to INSTALLATION . >
  5. Install the transmission assembly to vehicle. < Ref. to INSTALLATION . >
scientia non olet · About LEMON Manuals