Front Door Glass: Removal
- Remove the front door trim. Refer to REMOVAL , Front Door Trim.
- Remove the front speaker. Refer to INSTALLATION , Front Speaker.
- Remove the sealing cover. Refer to REMOVAL , Front Sealing Cover.
- Remove the outer mirror assembly. Refer to REMOVAL , Outer Mirror Assembly.
- Remove the front end of door weatherstrip and gusset.
- Remove the stabilizers.
- Remove the rear end of door weatherstrip and weatherstrip outer.
- Operate the power window switch to move the glass to position shown in the figure, and then remove the two nuts from service holes.
- Take out the door glass.
NOTE:
- Do not turn the regulator in closing direction after removal of the glass. Otherwise gear may be disengaged.