LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Trans (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press [YES] key.
  3. Press the [YES] key after displayed information of transmission type.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press [YES] key.
  5. When the 'Done' and 'Turn Ignition Switch OFF' are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals