LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Baja Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Trans) >> Reduction Driven Gear >> Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring From Reduction Driven Gear
    G02875934Courtesy of SUBARU OF AMERICA, INC.
  2. Using ST, remove ball bearing from reduction driven gear.
    1. ST 498077600 REMOVER
    Fig 2: Removing Ball Bearing From Reduction Driven Gear
    G02875935Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals