Reduction Drive Gear: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly.>
Remove rear vehicle speed sensor, and separate the transmission case and extension case.
< Ref. to REMOVAL , Extension Case.>
Remove the reduction driven gear. < Ref. to REMOVAL , Reduction Driven Gear.>
Using ST, extract the reduction drive gear.
1. ST1 499737100 PULLER
2. ST2 899524100 PULLER SET
Fig 1: Extracting Reduction Drive Gear
Courtesy of SUBARU OF AMERICA, INC.