LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Baja Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security & Locks (All Models) >> Keyless Transmitter >> Replacement >> Entering Programming Mode

Entering Programming Mode

  1. Disarm the security system.
  2. Open the driver's door and sit in the driver's seat.
  3. Close the driver's door.
  4. Place the ignition key into the ignition switch and cycle the switch from LOCK to ON ten times within 15 seconds. Be sure to stop at the LOCK position. The horn will sound once to indicate that you are in the transmitter programming mode.
scientia non olet · About LEMON Manuals