LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Locks & Keyless Entry Systems >> Removal & Installation >> Keyless Entry Control Module >> Removal & Installation

Removal & Installation

  1. Disconnect ground cable from battery.
  2. Remove glove box. See Figure .
  3. Remove nut. Remove keyless entry control module (B) and the other electrical control module (A) while disconnecting the connector. See Fig 1 .
  4. Disconnect keyless entry control module and the other electrical control module.
  5. Install in the reverse order of the removal procedure.
Fig 1: Removing Keyless Entry Control Module
G00189354Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals