Clutch Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Move the clevis pin of the push rod right and left and hold where it moves smoothly, then measure stroke of clutch pedal.
Specified clutch pedal full stroke: A 130 - 135 mm (5.12 - 5.31 in)

Tightening torque: T: 8 N.m (0.8 kgf-m, 5.8 ft-lb)

Fig 1: Measuring Stroke Of Clutch Pedal
Courtesy of SUBARU OF AMERICA, INC.
If the clutch pedal stroke is out of specification, adjust the stroke. Refer to ADJUSTMENT , Clutch Pedal.
Connect the clutch switch connector.