LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Impreza RS, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Window/Mirrors >> Windshield Glass >> Removal >> Using Piano Wire

Using Piano Wire

  1. Remove the cowl panel. Refer to REMOVAL , Cowl Panel.
  2. Remove the roof molding and upper front molding.
  3. Tape the body side of the circumference of windshield glass for protection.
  4. Make a hole in the adhesive layer using drill or knife.
  5. Pass the piano wire through the hole, and attach securely both the wire ends to pieces of wood.
    Fig 1: Passing Piano Wire Through The Hole In Adhesive Layer
    G02868539Courtesy of SUBARU OF AMERICA, INC.
  6. Pull the wire ends alternately to cut off the adhesive layer.
    CAUTION:
    • Do not tightly pull the piano wire against the windshield glass edge.
    • Be careful not to damage interior and exterior parts.
    • When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
    • Do not cross piano wires. Otherwise they may be cut.
scientia non olet · About LEMON Manuals