Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Apply fluid packing to the oil pressure switch threads.
Fluid packing:
1. Parts No. 004403042
2. THREE BOND 1324 or equivalent
Fig 1: Applying Fluid Packing To Oil Pressure Switch Threads
Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch onto engine block.
Tightening torque:
1. 25 N.m (2.5 kgf-m, 18.1 ft-lb)
Fig 2: Installing Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal of oil pressure switch.

Fig 3: Connection Terminal Of Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Install the generator on bracket. Refer to INSTALLATION , Generator.