Knock Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner case. Refer to REMOVAL , Air Cleaner Case.
Disconnect the knock sensor connector.

Fig 2: Identifying Knock Sensor Connector For Removal
Courtesy of SUBARU OF AMERICA, INC.
Remove the knock sensor from the cylinder block.

Fig 3: Removing Knock From Cylinder Block
Courtesy of SUBARU OF AMERICA, INC.