RH Side

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Release the fuel pressure.
Refer to RELEASING OF FUEL PRESSURE , OPERATION, Fuel.
Open the fuel flap lid, and remove the fuel filler cap.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the resonator chamber. Refer to REMOVAL , Resonator Chambers.
Remove the spark plug cords from the spark plugs (#1 and #3 cylinders).

Fig 2: Identifying Spark Plug Cords For Removal
Courtesy of SUBARU OF AMERICA, INC.
Remove the power steering pump and tank from the brackets.
1. Remove the front side V-belt. Refer to REMOVAL , V-belt.
2. Remove the bolts which hold the power steering pipes onto the intake manifold protector.
  
  Fig 3: Identifying Bolts For Removal
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the bolts which install the power steering pump to the bracket.
  
  Fig 4: Identifying Bolts For Removing
  Courtesy of SUBARU OF AMERICA, INC.
4. Disconnect the connector from the power steering pump switch.
  
  Fig 5: Disconnecting Connector From Power Steering Pump Switch
  Courtesy of SUBARU OF AMERICA, INC.
5. Remove the power steering tank from the bracket by pulling it upwards.
  
  Fig 6: Locating Power Steering Tank Bracket For Removal
  Courtesy of SUBARU OF AMERICA, INC.
6. Place the power steering pump and tank on the right side wheel apron.
  
  Fig 7: Placing Power Steering Pump & Tank On Right Side Wheel Apron
  Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe protector RH.

Fig 8: Removing Fuel Pipe Protector RH
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel injector.

Fig 9: Identifying Connector For Disconnection
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt which holds the injector pipe to the intake manifold.

Fig 10: Locating Bolts For Removal
Courtesy of SUBARU OF AMERICA, INC.

Fig 11: Locating Bolts For Removal
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector from the intake manifold.
1. Remove the fuel injector securing clip.
  
  Fig 12: Locating Fuel Injector Securing Clip For Removal
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove the fuel injector while lifting up the fuel injector pipe.
Fig 13: Removing Fuel Injector While Lifting Up Fuel Injector Pipe
Courtesy of SUBARU OF AMERICA, INC.