Valve Body: Installation

WARNING: This page is about a different car, the 2003 Subaru Impreza and 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Set the select lever in "N" position.
Install the control valve and ground earth connectors. See Figure .
Connect all connector. See Figure .
Attach the magnet at the specified position. See Fig 1 .
Apply proper amount of liquid gasket to the entire oil pan mating surface. See Fig 2 .
Install the oil pan.
Pour ATF into the oil charge pipe.
Check the level of the ATF.

Fig 1: Attaching Magnet

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Applying Proper Amount Of Liquid To Oil Pan Mating Surface

Courtesy of SUBARU OF AMERICA, INC.