LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (A/T Servicing) >> Removal & Installation >> Select Cable >> Installation

Select Cable: Installation

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install select cable to plate assembly.
  2. Install select cable to range select lever.
  3. Install plate assembly to transmission. See Figure .
  4. Install snap pin to range select lever. See Figure .
  5. Move the select lever to the "N" position, then adjust the select cable position. See SELECT CABLE  under ADJUSTMENTS.
  6. Install heat shield cover.
scientia non olet · About LEMON Manuals