Front Differential
WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Bevel gear to pinion backlash 0.13 - 0.18 mm (0.0051 - 0.0071 in)
WASHER THICKNESS SPECIFICATION
| Part No. | Thickness mm (in) | Part No. | Thickness mm (in) |
|---|---|---|---|
| 803038021 | 0.925 - 0.950 (0.0364 - 0.0374) | 803038023 | 1.025 - 1.050 (0.0404 - 0.0413) |
| 803038022 | 0.975 - 1.000 (0.0384 - 0.0394) | - | - |
Pinion shaft to axle drive shaft clearance 0 - 0.2 mm (0 - 0.008 in)
SNAP RING (OUTER-28) THICKNESS SPECIFICATION
| Part No. | Thickness mm (in) | Part No. | Thickness mm (in) |
|---|---|---|---|
| 805028011 | 1.05 (0.0413) | 805028012 | 1.20 (0.0472) |