Ignition Key Lock

WARNING: This page is about a different car, the 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground terminal from battery.
Remove steering column. For removal procedure, see appropriate STEERING COLUMN article.
Secure the steering column in a vise. Remove the bolt with a drill. See Fig 1 .
Remove the ignition key lock.
Use a new torn bolt. Tighten the torn bolt to the end of the thread. See Fig 2 .

Fig 1: Removing Steering Column Bolt

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Removing Ignition Key Lock

Courtesy of SUBARU OF AMERICA, INC.