LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Clutch System) >> Master Cylinder >> Assembly

Master Cylinder: Assembly

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clutch damper.
  2. Apply a coat of grease to the contacting surfaces of the push rod and piston before installation.
    1. Grease: SILICONE GREASE G40M (Part No. 004404003) 
    Fig 1: Identifying Clutch Damper
    G00938098Courtesy of SUBARU OF AMERICA, INC.
  3. To assemble the master cylinder, reverse the sequence of disassembly procedure.
    1. Tightening torque: 10 N.m (1.0 kgf-m, 7 ft-lb) 
scientia non olet · About LEMON Manuals