Select Lever: Disassembly

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the packing.
Remove the grip.
Remove the indicator light, and then remove the indicator cover.
NOTE: Be careful not to break the indicator light during removal.

Fig 1: Identifying Indicator Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the slider.
Remove the cover.

Fig 2: Identifying Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the clips, and then remove the guide plate.

Fig 3: Identifying Clips
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp, and the remove the shift lock solenoid.

Fig 4: Identifying Shift Lock Solenoid
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt.

Fig 5: Identifying Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate A, B, C and bushing.

Fig 6: Identifying Lock Plate A, B, C And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion plate.

Fig 7: Identifying Cushion Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip, and then remove the "P" range switch.

Fig 8: Identifying Clip And "P" Range Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet, and then extract spring pin.

Fig 9: Identifying Grommet, And Extract Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever lower, and then take away the select lever COMPL from plate.

Fig 10: Identifying Select Lever Lower & Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the detent spring, and then remove the detent arm.

Fig 11: Identifying Detent Spring And Detent Arm
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever COMPL bushing from bracket.

Fig 12: Identifying Select Lever Comply Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the bracket from select lever COMPL.

Fig 13: Identifying Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing from bracket.

Fig 14: Identifying Bushing
Courtesy of SUBARU OF AMERICA, INC.