LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (A/T Control Systems) >> Select Lever >> Assembly

Select Lever: Assembly

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts before assembly.
  2. Apply grease [SUNLIGHT 2 (Part No. 003602010) or equivalent] to each parts. < Ref. to A/T SELECT LEVER  .>
    CAUTION: Apply grease [SUNCALL] to the axle of lock plate.
  3. Assembly is in the reverse order of disassembly.
  4. After completion of fitting, transfer the select lever to range "P" - "1", then check whether the indicator and select lever agree, whether the pointer and position mark agree and what the operating force is.
scientia non olet · About LEMON Manuals