Rear Regulator and Motor Assembly: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door glass. Refer to REMOVAL , Rear Door Glass.
Remove the front sash.
Disconnect the motor connector.
Loosen the four bolts and two nuts to remove regulator assembly.

Fig 1: Removing Rear Regulator Assembly
Courtesy of SUBARU OF AMERICA, INC.
Loosen the screws to remove motor assembly.

Fig 2: Removing Rear Motor Assembly
Courtesy of SUBARU OF AMERICA, INC.