CROSSMEMBER And Cushion Rubber
WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear cushion rubber.
- Tightening torque: 39 N.m (4.0 kgf-m, 29 ft-lb)
- Install the crossmember.
Tightening torque:
- T1: 35 N.m (3.6 kgf-m, 26 ft-lb)
- T2: 70 N.m (7.1 kgf-m, 51 ft-lb)
- Remove the transmission jack.
- Install the heat shield cover.
- Install the front, center, rear exhaust pipes and the muffler. Refer to INSTALLATION , Front Exhaust Pipe, INSTALLATION , Rear Exhaust Pipe and INSTALLATION , Muffler.