LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Automatic Transmission) >> Dropping Resistor >> Installation

Dropping Resistor: Installation

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    1. Tightening torque:  6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
    Fig 1: Installing Dropping Resistor
    G02093140Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals