LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Overhaul Automatic Transmission) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install snap rings to reduction driven gear. (2.5 L US model and 3.0 L model).
  2. Using a press, install ball bearing to reduction driven gear.
    Fig 1: Installing Ball Bearing
    G02053147
  3. Install snap ring to reduction driven gear.
    Fig 2: Installing Snap Ring
    G02053148
scientia non olet · About LEMON Manuals