LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Rear Suspension) >> Removal & Installation >> Rear Sub-Frame >> Installation

Rear Sub-Frame: Installation

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in reverse order of removal.
  2. For installation and tighten rear differential.
    1. With T-type, see REMOVAL, Rear Differential for T-type .
    2. With VA-type, see REMOVAL, Rear Differential for VA-type .
    NOTE: Check wheel alignment and adjust if necessary.
  3. Using transmission jack, support rear arm horizontally and tighten nuts and bolts securing rear arm, link front, link rear, link upper and shock absorber. See Figure.
scientia non olet · About LEMON Manuals