LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (A/T Servicing) >> Removal & Installation >> Select Cable >> Installation

Select Cable: Installation

WARNING: This page is about a different car, the 2003 Subaru Impreza and 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install select cable to plate assembly.
  2. Install select cable to range select lever.
  3. Install plate assembly to transmission. See Figure .
  4. Install snap pin to range select lever. See Figure .
  5. Insert the thread portion of the other inner cable and into connector hole of the select lever, and fix the other outer cable end to bracket.
  6. Move the select lever to the "N" position, then adjust the select cable position. See SELECT CABLE  under ADJUSTMENTS.
  7. Install heat shield cover.
  8. Install the front and center exhaust pipe. (Non-Turbo Model)
  9. Install the center exhaust pipe. (Turbo Model)
scientia non olet · About LEMON Manuals