LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Controls - Self-Diagnostics - 3.0L) >> Self-Diagnostic System >> Led Operation Mode

Led Operation Mode

WARNING: This page is about a different car, the 2003 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. On <Main Menu> display screen, select {Each System Check} and press [YES] key.
  2. On <System Selection Menu> display screen, select {Engine Control System} and press [YES] key.
  3. Press [YES] key after displayed information of engine type.
  4. On <Engine Diagnosis> display screen, select {Current Data Display & Save} and press [YES] key.
  5. On <Data Display Menu> display screen, select {Data & LED Display} and press [YES] key.
  6. Using scroll key, move display screen up or down until desired support data is shown, see Fig 1 .
Fig 1: LED Operation Mode Support Data
G00168849Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals