Ignition Key Lock

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Remove steering column. For removal procedure, see appropriate article on STEERING COLUMN.
Secure the steering column in a vise. Remove the bolt with a drill. See Fig 1 .
Remove the ignition key lock.
Use a new torn bolt. Tighten the torn bolt to the end of the thread. See Fig 2 .

Fig 1: Removing Steering Column Bolt

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Removing Ignition Key Lock

Courtesy of SUBARU OF AMERICA, INC.