LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Power Assisted System (Power Steering)) >> Tilt Steering Column >> Assembly

Tilt Steering Column: Assembly

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the combination switch to upper column shaft, and then install the upper column cover. Then route the ignition key harness and combination switch harness between column cover mounting bosses.

    Tightening torque: 

    1.2 N.m (0.12 kgf-m, 0.9 ft-lb) 

CAUTION: Do not overtighten the screw.
scientia non olet · About LEMON Manuals