LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Clutch System) >> Flywheel >> Inspection

Section 199 (Clutch System): Flywheel: Inspection

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Since this bearing is grease sealed and is of a non-lubrication type, do not wash with gasoline or any solvent. 
  1. Damage of facing, sliding surface and ring gear If defective, replace the flywheel.
    Fig 1: Inspecting Flywheel & Ring Gear
    G00919675Courtesy of SUBARU OF AMERICA, INC.
  2. Smoothness of rotation

    Rotate the ball bearing applying pressure in thrust direction.

  3. If noise or excessive play is noted, replace the flywheel.