LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Clutch System) >> Clutch Pedal >> Installation

Clutch Pedal: Installation

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    1. Tightening torque: 18 N.m (1.8 kgf-m, 13.0 ft-lb) 
    NOTE:
    • Be careful not to kink the accelerator cable.
    • Always use new clevis pins.
  2. Adjust the clutch pedal after installation. Refer to ASSEMBLY .
  3. Adjust the clutch switch (starter interlock). Refer to ADJUSTMENT .
scientia non olet · About LEMON Manuals