LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Fuel Injection (Fuel Systems) (H4DOTC)) >> Fuel Pump >> Installation >> Disassembly

Fuel Pump: Installation: Disassembly

WARNING: This page is about a different car, the 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel pump and pump holder.
    NOTE: When disassembling pump holder, be careful as it is installed with two pawls.
    Fig 1: Removing Fuel Pump & Pump Holder
    G00929006Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector from fuel pump.
    Fig 2: Disconnecting Connector From Fuel Pump
    G00929007Courtesy of SUBARU OF AMERICA, INC.