LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Fuel Injection (Fuel Systems) (H4DOTC)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G00928817Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the generator. Refer to REMOVAL , Generator.
  3. Drain the engine coolant. Refer to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.
  4. Disconnect the connector from the engine coolant temperature sensor.
    Fig 2: Removing Engine Coolant Temperature Sensor
    G00928818Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals