LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Power Assisted System (Power Steering)) >> Universal Joint >> Inspection

Universal Joint: Inspection

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Clean the disassembled parts with a cloth, and check for wear, damage, or any other faults. If necessary, repair or replace faulty parts.

Fig 1: Inspecting Universal Joint
G02873803Courtesy of SUBARU OF AMERICA, INC.

Measurement of folding torque of universal joint is as shown in the figures.

Service limit: 

  1. Maximum load;  5.49 N (0.56 kgf, 1.23 lb) or less
Fig 2: Measuring Of Folding Torque Of Universal Joint Long Yoke (1 Of 2)
G02873804Courtesy of SUBARU OF AMERICA, INC.

Service limit: 

  1. Maximum load;  5.49 N (0.56 kgf, 1.23 lb) or less
Fig 3: Measuring Of Folding Torque Of Universal Joint Long Yoke (2 Of 2)
G02873805Courtesy of SUBARU OF AMERICA, INC.

Service limit: 

  1. Maximum load;  8.43 N (0.86 kgf, 1.90 lb) or less
Fig 4: Measuring Of Folding Torque Of Universal Joint Short Yoke (1 Of 2)
G02873806Courtesy of SUBARU OF AMERICA, INC.

Service limit: 

  1. Maximum load;  8.43 N (0.86 kgf, 1.90 lb) or less
Fig 5: Measuring Of Folding Torque Of Universal Joint Short Yoke (2 Of 2)
G02873807Courtesy of SUBARU OF AMERICA, INC.