LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Power Assisted System (Power Steering)) >> Steering Gearbox >> Inspection >> Service Limit

Service Limit

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Make a measurement as follows. If it exceeds the specified service limit, adjust or replace.

NOTE: When making a measurement, vise gearbox by using ST. Never vise gearbox by inserting aluminum plates, etc. between vise and gearbox.
  1. ST 926200000 STAND

Sliding resistance of rack shaft: 

  1. Service limit:  304 N (31 kgf, 68 lb) or less
Fig 1: Sliding Resistance Of Rack Shaft (1 Of 2)
G02873874Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Sliding Resistance Of Rack Shaft (2 Of 2)
G02873875Courtesy of SUBARU OF AMERICA, INC.