LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Power Assisted System (Power Steering)) >> Tilt Steering Column >> Assembly

Tilt Steering Column: Assembly

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert combination switch to upper column shaft, and install upper column cover. Then route ignition key harness and combination switch harness between column cover mounting bosses.
    1. Tightening torque:  1.2 N.m (0.12 kgf-m, 0.9 ft-lb)
    CAUTION: Don't overtorque screw. 
scientia non olet · About LEMON Manuals