LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Clutch System) >> Master Cylinder >> Assembly

Master Cylinder: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Apply a coat of grease to the contacting surfaces of the push rod and piston before installation.

    Grease: 

    1. SILICONE GREASE G40M (Part No. 004404003) 
      Fig 1: Identifying Contact Surfaces To Be Greased
      G02037383
  2. To assemble the master cylinder reverse the sequence of disassembly procedure.
scientia non olet · About LEMON Manuals