LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission) >> Transmission Case >> Adjustment

Transmission Case: Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Make adjustment so that the heavy stroke (reverse side) is a little more than the light stroke (1st/2nd side).
  2. To adjust, remove bolts holding reverse check sleeve assembly to the case, move sleeve assembly outward, and place adjustment shim (0 to 1 ea.) between sleeve assembly and case to adjust the clearance.
CAUTION: Be careful not to break O-ring when placing shim(s).
NOTE:
  • When shim is removed, the neutral position will move closer to reverse; when shim is added, the neutral position will move closer to 1st gear.
  • If shims alone cannot adjust the clearance, replace reverse accent shaft and re-adjust.
Fig 1: Adjustment Shim Chart
G02037244
Fig 2: Reverse Accent Shaft Chart
G02037245
scientia non olet · About LEMON Manuals