LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Front Suspension) >> Removal & Installation >> Strut >> Installation

Removal & Installation: Strut: Installation

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install strut mount at upper side of strut to body and tighten with nuts. See TORQUE SPECIFICATIONS  .
  2. Install ABS sensor harness to strut.
    CAUTION:
    • While holding head of adjusting bolt, tighten self-locking nut.
    • Be sure to use new self-locking nut.
  3. Position aligning mark on camber adjustment bolt with aligning mark on lower side of strut.
  4. Install brake hose at lower side of strut with clamp.
    CAUTION: Be sure to bleed air from brake system.
  5. Install union bolts which secure brake caliper to brake hose. See Figure .
    NOTE: Check wheel alignment and adjust if necessary.
  6. Install wheels.
scientia non olet · About LEMON Manuals