LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Automatic Transmission) >> Reduction Driven Gear >> Installation >> MPT Model

MPT Model

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the select lever to "P" range.
  2. Using a plastic hammer, install reduction driven gear assembly and new washer, and tighten new drive pinion lock nut.

    Tightening torque: 

    100 N.m (10.2 kgf-m, 73.8 ft-lb) 

    Fig 1: Tightening Drive Pinion Lock Nut
    G00956495Courtesy of SUBARU OF AMERICA, INC.
  3. After tightening, stake the lock nut securely.
  4. Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to INSTALLATION <-- , Extension Case -->.>
  5. Install the transmission assembly to vehicle. < Ref. to INSTALLATION <-- , Automatic Transmission Assembly -->.>
scientia non olet · About LEMON Manuals