Dropping Resistor: Removal

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Dropping resistor is installed on non-turbo models only.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake duct. < Ref. to REMOVAL .>
Disconnect the connector from dropping resistor.
Remove the dropping resistor.

Fig 2: Removing Dropping Resistor
Courtesy of SUBARU OF AMERICA, INC.