Transfer Driven Gear: Assembly

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST, install the roller bearing (extension case side).
ST1 398177700 INSTALLER

ST2 899864100 REMOVER

NOTE: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton)

Fig 1: Installing Roller Bearing (Extension Case Side)
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the roller bearing (transfer case side).
ST 499757002 INSTALLER

NOTE: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton)

Fig 2: Installing Roller Bearing (Transfer Case Side)
Courtesy of SUBARU OF AMERICA, INC.