LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Manual Transmission And Differential) >> Transfer Drive Gear >> Assembly

Transfer Drive Gear: Assembly

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the ST applying to inner race of bearing and install to drive shaft.

    ST 398177700 INSTALLER

    NOTE: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton)
    Fig 1: Setting ST Applying To Inner Race Of Bearing
    G00916430Courtesy of SUBARU OF AMERICA, INC.
  2. Install the snap ring on transfer drive shaft.
  3. Check the clearance between snap ring and ball bearing. Refer to INSPECTION  , Transfer Drive Gear.
scientia non olet · About LEMON Manuals