LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission) >> Reduction Drive Gear >> Installation

Reduction Drive Gear: Installation

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the reduction drive gear assembly.
    NOTE: Install it fully into position until the bearing shoulder bottoms.
    Fig 1: Installing Reduction Drive Gear Assembly
    G00924135Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction driven gear. Refer to INSTALLATION .
  3. Combine the transmission case with the extension case, and install rear vehicle speed sensor. Refer to INSTALLATION .
  4. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals