Rear Vehicle Speed Sensor: Removal

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

NON-TURBO MODEL
When removing the rear vehicle speed sensor, refer to FRONT VEHICLE SPEED SENSOR .
TURBO MODEL
1. Set vehicle on a lift.
2. Disconnect ground cable from battery.
3. Lift up the vehicle.
4. Disconnect rear vehicle speed sensor connector.
  
  Fig 1: Disconnecting Rear Vehicle Speed Sensor Connector
  Courtesy of SUBARU OF AMERICA, INC.
5. Remove rear vehicle speed sensor.
  
  Fig 2: Removing Rear Vehicle Speed Sensor
  Courtesy of SUBARU OF AMERICA, INC.