LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission) >> Rear Vehicle Speed Sensor >> Installation

Rear Vehicle Speed Sensor: Installation

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. NON-TURBO MODEL 

    When installing the rear vehicle speed sensor, refer to INSTALLATION , Front Vehicle Speed Sensor.

  2. TURBO MODEL 

    Install in the reverse order of removal.

    NOTE: Replace O-ring with a new one.
    1. Tightening torque: 7 N.m (0.7 kgf.m, 5.1 ft.lb) 
scientia non olet · About LEMON Manuals