AT Main Case: Inspection
WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
- HIGH CLUTCH AND REVERSE CLUTCH
Inspect the following items.
- Drive plate facing for wear and damage
- Snap ring for wear, return spring for setting and breakage, and snap ring retainer for deformation
- Lip seal and D-ring for damage
- Piston and drum check ball for operation
- Adjust total end play. Refer to ADJUSTMENT , Oil Pump Housing.
- PLANETARY GEAR AND LOW CLUTCH
Inspect the following items.
- Drive plate facing for wear and damage
- Snap ring for wear, return spring for breakage or setting, and spring retainer for deformation
- Lip seal and D-ring for damage
- Piston check ball for operation
- Measure the total end play and adjust to within specifications.
Refer to ADJUSTMENT , Oil Pump Housing.
- 2-4 BRAKE
Inspect the following items.
- Drive plate facing for wear and damage
- Snap ring for wear and spring retainer for deformation
- Lip seal and D-ring for damage
- Measure the total end play and adjust to within specifications. Refer to ADJUSTMENT , Oil Pump Housing.
- ONE-WAY CLUTCH
- Make sure the snap ring is not worn and the seal rings are not damaged.
- Measure the total end play and adjust to within specifications. Refer to ADJUSTMENT , Oil Pump Housing.
- LOW AND REVERSE BRAKE
Check for the following.
- Drive plate facing for wear or damage
- Snap ring for wear and spring retainer for deformation